|
|||
|
|
||
New Releases: Coolit v.7, CoolitPCB v.3 |
|||
|
Both Coolit and
CoolitPCB have had major upgrades this year. Coolit's new v7 delivers
parametric model construction, improves presentation and rendering of non-rectangular objects, and
slashes solution time with its much improved zonal mesh calculations. And there's
a new solar radiation dialog, tracking and
synchronizing library with model object, better reporting, and many other
features that make Coolit even more user-friendly and effective to use. |
||
Grid zones around heat sinks |
|||
|
Heat sinks require many grid cells in order to resolve the fin geometry. When a standard parametric heat sink is used, the compact model can reduce the cell count. However, if the compact model is not an option, a mesh zone around the heat sink could speed up the solution. In order for such a solution to be accurate, you must ensure that the zonal grid does not “hug” the fins. Leaving some space between the grid boundary and the fins will make the solution much more accurate and it will converge faster. You can snap the grid zone to the heat sink base without compromising accuracy. |
||
Library-project synchronization |
|||
|
You can now synchronize the size and properties of model interior objects with their library object. The library object is always considered to be the original and model objects are considered copies, even if the library object was created from a model object. To do the synchronization, open the Objects Manager, click Library>> and then click Synchronize… |
||
|
|||
|
The upcoming Coolit and CoolitPCB releases will include a microelectronic package library. The library will have both specific package models, as well as package model constructors, for the DIP, BGA and other type packages. Once a new model is constructed, it can be added to the library for future reference. |
||
Looking to solve your thermal problems? |
|||
|
If you are looking for accurate, fast, and cost-effective thermal solutions, give us a call. Our consulting service is a good fit both for smaller and start-up companies with limited in-house thermal design expertise, as well as for larger companies that want to leverage outside expertise. |
||
|