[ Coolit News ]	Honeywell teams up with Daat and other news
[ Coolit Tips ]	How to get the most out of OptimizeIt's parametric studies
	How to change the default Grid
[ Announcement ]	Looking to solve your thermal problems?
Coolit News	Honeywell teams up with Daat and other newson feasibility study
	Recently, Honeywell selected Daat to help design a ????. The finished model ended up having well over 5,000 objects. "We knew it was going to be a big task, and we needed some answers in a hurry," said Honeywell's project engineer. "Daat put together an accurate model in the timeframe we needed and for a good price. We're very pleased." Recently, Honeywell selected Daat to analyze a complex design composed of COTS products.  The finished model ended up having well over 5,000 objects.  "We knew it was going to be a big task, and we needed some answers in a hurry," said Honeywell's project engineer.  "Daat put together an accurate model in the timeframe we needed and for a good price. We're very pleased." In other news, EXTRA: wWatch for the upcoming issue of Machine Design for an interview with Dr. Eldad Levy of CAS Ltd. on his recent experience with Coolit's automatic optimization module, OptimizeIt. Back to Top
Coolit Tips	How to get the most out of OptimizeIt's parametric studies
	A good way to savecomputation time on your parametric studies is to run your models with a coarser grid. By running a coarser grid, your results will be less accurate, but comparatively, they will still be valid. That isto say, eveneven if your simulation has a 20% error, all the cases in your study will be consistent in their ininaccuraciesy, and thus relevant in comparison to one another. Once you have identified the best case, you can refine the grid for that model and restart it. Back to Top
	How to change the default gGrid
	OptimizeIt needs to create grids for different caseswith different geometries. In order to ensure a meaningful comparison of computed results, the grids must be “consistent”, i.e. must be generated according to the same rules in each case. This is ensured by using thee ofthe default gridin OptimizeIt. While the default grid cannot be customized to the level of placing individual grid lines, you can still control it a great deal. To customize the default grid, Eenter grid mode, and from the Control Bar open the Grid Settings dialog. On the Cells Distribution page, adjust the grid to your satisfaction by using the slider controls and Apply button. The result is the new Default grid, which will be used in all OptimizeItI cases. Back to Top
Announcement	Looking to solve your thermal problems?
	If you are looking for accurate, fast, and cost-effective thermal solutions give us a call. This service is a good fit both for smaller and start-up companies with limited in-house thermal design expertise as well as for large companies that, which want to leverage outside expertise. Back to Top
	Unsubscribe	Email us your ideas	Contact sales